• Deutsch (DE-CH-AT)
  • English (United Kingdom)
  • French (Fr)

Plasma cutter CUT 50

€289,92 (net plus shipping)

Gerät & mitgeliefertes Zubehör • Device & standard accessory




Excellent quality by fully digital inverter technology!


  • A plasma beam which cuts through any electrically conductive metal easily

  • Powerful cutting speed which ensures high productivity

  • Clean cuts that do not need post-processing

  • Minimal operating costs through the use of air plasma – instead of expensive gas is compressed air used

  • Infinite adjustability of the cutting current of 10 - 50 A

  • No material distortion by heat - metal waste is minimized

  • Easy to understand operating concepts for each choice of particular setting, so you can concentrate fully on your cutting task

  • Maximum energy density with minimal heat distortion

  • Easy handling and low thermal expansion

  • Intelligent housing design with optimized air exchange

  • Powerful, high duty cycle of 60% at 50 amps

  • Quickly cooling ventilator allows a exploitation of maximum power


The plasma cutter  CUT 50 has the most advanced MOSFET inverter technology (Toshiba).The resulting special properties such as high speed and precision of control give the devices their excellent quality when cutting.


The CUT 50  is for industry, crafts and private gardening optimally suited. In the last 8 years, more than 5,000 STAHLWERK  plasma devices were used in different work situations..Easy use, stability and accuracy guarantee a cutting at the highest level.


The device comes complete operational. You need only connect the compressor. The compressor is not included. The power connector is installed by us. All you need is a 16A fuse.


Consulting - Service - Instruction - Help

Service is a top priority. Each customer has his own personal account manager, who support the customer in the execution of his appointment or assist him for questions and advice. The customer is served during and after the warranty period from us. In case of problems, call us, we are always available. You are also welcome to visit us. Our motivated team will always find a positive solution for you. Take advantage from our services. Everyone is welcome to test our equipment in detail under the guidance of our experts.







  • Switch on the hand grip (similar models work with cable ties).
  • Digital display.
  • Cutting power up to 12 mm, depending on material: construction steel ST37 to 12 mm, V2A to 8 mm, Aluminium up to 7-8 mm. These are real data (look at the video).
  • The device works at a high frequency ignition in contact with the workpiece, (advantage: more precise and faster cutting)
    In our shop you will find devices with up to 30 mm cutting power. For example:
  • Plasma cutter CUT 60 - up to 20 mm.
  • Plasma cutter CUT 100 - up to 30 mm.
  • Small cutting width.
  • High cutting speed.
  • Good cutting quality.
  • By the small deformation thin sheets can immediately be re-welded together.
  • Accurate and very stable arc. Perfect for cutting oil tanks, tubs, chassis or similar body. (Good alternative to disc grinder).


The inverter technology also allows an enormous weight and volume reduction both the transformer as well the balance resistance. Thus, it is possible to develop a device that weighs only 9 kg.


With the CUT 50, you can easily cut all conductive metals such as standard steel, copper, stainless steel, brass, aluminum, titanium, etc. Infinite adjustability of the cutting current of 10-50 A. An air compressor with at least 4.5 bar is required. (No more expensive gas). A commercial compressor is enough.


To work with this device, you need only:



Technical Data


  Power Vol.

AC 230 V

  Input frequency 50/60 Hz
  Duty cycle at 50 A 60%
  Duty cycle at 30 A 100%

  Display of output current     

10 - 50 A
  Fuse 16 A
  Housing shielding grade


  Cutting strength

12 mm

  Cutting width 1,2 mm
  Barometric pressure 4,5 bar
  Air flow mind. 80 L/min
  Arc deflection contact ignition
  Weight 8,3 kg

  Dimensions L x W x H (mm)   

   498 x 325 x 300 (without handle)   


Scope of delivery


  • The device PLASMA CUT 50.
  • Plasma tube package "AG-60" for CUT 50 / CUT 55.
  • Plasma accessories set: 1 nozzle, 1 electrode, 1 ceramic cap (installed them each one piece already in the hose package).
  • Ground wire 3 m.
  • Water separator with pressure (manometer).
  • Connection hose: 3m and 0,5m.
  • User guide.



Video tutorial


Shopping cart

Your Cart is currently empty.